AT91SAM7S256D-AU ARM Microcontrollers MCU 256K Flash SRAM 64K ARM based MCU

Short Description:

Manufacturers: Microchip Technology
Product Category: Embedded – Microcontrollers
Data Sheet: AT91SAM7S256D-AU
Description: IC MCU 32BIT 256KB FLASH 64LQFP
RoHS status: RoHS Compliant


Product Detail

Features

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: Microchip
Product Category: ARM Microcontrollers - MCU
RoHS: Details
Series: SAM7S/SE
Mounting Style: SMD/SMT
Package / Case: LQFP-64
Core: ARM7TDMI
Program Memory Size: 256 kB
Data Bus Width: 32 bit/16 bit
ADC Resolution: 10 bit
Maximum Clock Frequency: 55 MHz
Number of I/Os: 32 I/O
Data RAM Size: 64 kB
Supply Voltage - Min: 1.65 V
Supply Voltage - Max: 1.95 V
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 85 C
Packaging: Tray
Analog Supply Voltage: 3.3 V
Brand: Microchip Technology / Atmel
Data RAM Type: RAM
Height: 1.6 mm
I/O Voltage: 1.65 V to 3.6 V
Interface Type: I2C, SPI, USART, USB
Length: 7 mm
Moisture Sensitive: Yes
Number of ADC Channels: 8 Channel
Number of Timers/Counters: 3 Timer
Processor Series: SAM7S
Product: MCU
Product Type: ARM Microcontrollers - MCU
Program Memory Type: Flash
Factory Pack Quantity: 160
Subcategory: Microcontrollers - MCU
Watchdog Timers: Watchdog Timer
Width: 7 mm
Unit Weight: 0.012088 oz

♠ AT91SAM ARM-based Flash MCU

Atmel’s SAM7S is a series of low pincount Flash microcontrollers based on the 32-bit ARM RISC processor. It features a high-speed Flash and an SRAM, a large set of peripherals, including a USB 2.0 device (except for the SAM7S32 and SAM7S16), and a complete set of system functions minimizing the number of external components.

The device is an ideal migration path for 8-bit microcontroller users looking for additional performance and extended memory. The embedded Flash memory can be programmed in-system via the JTAG-ICE interface or via a parallel interface on a production programmer prior to mounting. Built-in lock bits and a security bit protect the firmware from accidental overwrite and preserves its confidentiality.

The SAM7S Series system controller includes a reset controller capable of managing the power-on sequence of the microcontroller and the complete system. Correct device operation can be monitored by a built-in brownout detector and a watchdog running off an integrated RC oscillator.

The SAM7S Series are general-purpose microcontrollers. Their integrated USB Device port makes them ideal devices for peripheral applications requiring connectivity to a PC or cellular phone. Their aggressive price point and high level of integration pushes their scope of use far into the cost-sensitive, high-volume consumer market.


  • Previous:
  • Next:

  • • Incorporates the ARM7TDMI® ARM® Thumb® Processor
    – High-performance 32-bit RISC Architecture
    – High-density 16-bit Instruction Set
    – Leader in MIPS/Watt
    – EmbeddedICE™ In-circuit Emulation, Debug Communication Channel Support

    • Internal High-speed Flash
    – 512 Kbytes (SAM7S512) Organized in Two Contiguous Banks of 1024 Pages of 256 Bytes (Dual Plane)
    – 256 Kbytes (SAM7S256) Organized in 1024 Pages of 256 Bytes (Single Plane)
    – 128 Kbytes (SAM7S128) Organized in 512 Pages of 256 Bytes (Single Plane)
    – 64 Kbytes (SAM7S64) Organized in 512 Pages of 128 Bytes (Single Plane)
    – 32 Kbytes (SAM7S321/32) Organized in 256 Pages of 128 Bytes (Single Plane)
    – 16 Kbytes (SAM7S161/16) Organized in 256 Pages of 64 Bytes (Single Plane)
    – Single Cycle Access at Up to 30 MHz in Worst Case Conditions
    – Prefetch Buffer Optimizing Thumb Instruction Execution at Maximum Speed
    – Page Programming Time: 6 ms, Including Page Auto-erase, Full Erase Time: 15 ms
    – 10,000 Write Cycles, 10-year Data Retention Capability, Sector Lock Capabilities, Flash Security Bit
    – Fast Flash Programming Interface for High Volume Production

    • Internal High-speed SRAM, Single-cycle Access at Maximum Speed
    – 64 Kbytes (SAM7S512/256)
    – 32 Kbytes (SAM7S128)
    – 16 Kbytes (SAM7S64)
    – 8 Kbytes (SAM7S321/32)
    – 4 Kbytes (SAM7S161/16)

    • Memory Controller (MC)
    – Embedded Flash Controller, Abort Status and Misalignment Detection

    • Reset Controller (RSTC)
    – Based on Power-on Reset and Low-power Factory-calibrated Brown-out Detector
    – Provides External Reset Signal Shaping and Reset Source Status

    • Clock Generator (CKGR)
    – Low-power RC Oscillator, 3 to 20 MHz On-chip Oscillator and one PLL

    • Power Management Controller (PMC)
    – Software Power Optimization Capabilities, Including Slow Clock Mode (Down to 500 Hz) and Idle Mode
    – Three Programmable External Clock Signals

    • Advanced Interrupt Controller (AIC)
    – Individually Maskable, Eight-level Priority, Vectored Interrupt Sources
    – Two (SAM7S512/256/128/64/321/161) or One (SAM7S32/16) External Interrupt Source(s) and One Fast Interrupt Source, Spurious Interrupt Protected

    • Debug Unit (DBGU)
    – 2-wire UART and Support for Debug Communication Channel interrupt, Programmable ICE Access Prevention
    – Mode for General Purpose 2-wire UART Serial Communication

    • Periodic Interval Timer (PIT)
    – 20-bit Programmable Counter plus 12-bit Interval Counter

    • Windowed Watchdog (WDT)
    – 12-bit key-protected Programmable Counter
    – Provides Reset or Interrupt Signals to the System
    – Counter May Be Stopped While the Processor is in Debug State or in Idle Mode

    • Real-time Timer (RTT)
    – 32-bit Free-running Counter with Alarm
    – Runs Off the Internal RC Oscillator

    • One Parallel Input/Output Controller (PIOA)
    – Thirty-two (SAM7S512/256/128/64/321/161) or twenty-one (SAM7S32/16) Programmable I/O Lines Multiplexed with up to Two Peripheral I/Os
    – Input Change Interrupt Capability on Each I/O Line
    – Individually Programmable Open-drain, Pull-up resistor and Synchronous Output

    • Eleven (SAM7S512/256/128/64/321/161) or Nine (SAM7S32/16) Peripheral DMA Controller (PDC) Channels

    • One USB 2.0 Full Speed (12 Mbits per Second) Device Port (Except for the SAM7S32/16).
    – On-chip Transceiver, 328-byte Configurable Integrated FIFOs

    • One Synchronous Serial Controller (SSC)
    – Independent Clock and Frame Sync Signals for Each Receiver and Transmitter
    – I²S Analog Interface Support, Time Division Multiplex Support
    – High-speed Continuous Data Stream Capabilities with 32-bit Data Transfer

    • Two (SAM7S512/256/128/64/321/161) or One (SAM7S32/16) Universal Synchronous/Asynchronous Receiver Transmitters (USART)
    – Individual Baud Rate Generator, IrDA® Infrared Modulation/Demodulation
    – Support for ISO7816 T0/T1 Smart Card, Hardware Handshaking, RS485 Support
    – Full Modem Line Support on USART1 (SAM7S512/256/128/64/321/161)

    • One Master/Slave Serial Peripheral Interface (SPI)
    – 8- to 16-bit Programmable Data Length, Four External Peripheral Chip Selects

    • One Three-channel 16-bit Timer/Counter (TC)
    – Three External Clock Input and Two Multi-purpose I/O Pins per Channel (SAM7S512/256/128/64/321/161)
    – One External Clock Input and Two Multi-purpose I/O Pins for the first Two Channels Only (SAM7S32/16)
    – Double PWM Generation, Capture/Waveform Mode, Up/Down Capability

    • One Four-channel 16-bit PWM Controller (PWMC)

    • One Two-wire Interface (TWI)
    – Master Mode Support Only, All Two-wire Atmel EEPROMs and I2 C Compatible Devices Supported (SAM7S512/256/128/64/321/32)
    – Master, Multi-Master and Slave Mode Support, All Two-wire Atmel EEPROMs and I2 C Compatible Devices Supported (SAM7S161/16)

    • One 8-channel 10-bit Analog-to-Digital Converter, Four Channels Multiplexed with Digital I/Os

    • SAM-BA™ Boot Assistant
    – Default Boot program
    – Interface with SAM-BA Graphic User Interface

    • IEEE® 1149.1 JTAG Boundary Scan on All Digital Pins

    • 5V-tolerant I/Os, including Four High-current Drive I/O lines, Up to 16 mA Each (SAM7S161/16 I/Os Not 5V-tolerant)

    • Power Supplies
    – Embedded 1.8V Regulator, Drawing up to 100 mA for the Core and External Components
    – 3.3V or 1.8V VDDIO I/O Lines Power Supply, Independent 3.3V VDDFLASH Flash Power Supply
    – 1.8V VDDCORE Core Power Supply with Brown-out Detector

    • Fully Static Operation: Up to 55 MHz at 1.65V and 85°C Worst Case Conditions

    • Available in 64-lead LQFP Green or 64-pad QFN Green Package (SAM7S512/256/128/64/321/161) and 48-lead LQFP Green or 48-pad QFN Green Package (SAM7S32/16)

    Related Products