TCAN1044VDRBRQ1 CAN Interface IC Automotive 1.8V

Short Description:

Manufacturers:Texas Instruments

Product Category: Interface ICs - CAN Interface IC

Data Sheet: TCAN1044VDRBRQ1

Description:CAN Interface IC Automotive fault-protected high-speed CAN transceiver with standby and 1.8-V I/O support 8-SON -40 to 125

RoHS status:RoHS Compliant


Product Detail

Features

Applications

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: Texas Instruments
Product Category: CAN Interface IC
RoHS:  Details
Mounting Style: SMD/SMT
Package / Case: SON-8
Series: TCAN1044V-Q1
Type: High Speed CAN FD Transceiver
Data Rate: 8 Mb/s
Number of Drivers: 1 Driver
Number of Receivers: 1 Receiver
Supply Voltage - Max: 5.5 V
Supply Voltage - Min: 4.5 V
Operating Supply Current: 49 mA
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 125 C
ESD Protection: 10 kV
Packaging: Reel
Packaging: Cut Tape
Brand: Texas Instruments
Development Kit: TCAN1042DEVM
Input Type: Differential
Interface Type: CAN
Moisture Sensitive: Yes
Operating Supply Voltage: 5 V
Output Type: Differential
Pd - Power Dissipation: 120 mW
Polarity: Positive
Product: CAN Transceivers
Product Type: CAN Interface IC
Propagation Delay Time: 80 ns
Protocol Supported: CAN
Factory Pack Quantity: 3000
Subcategory: Interface ICs

♠ TCAN1044V-Q1 Automotive Fault-Protected CAN FD Transceiver With 1.8-V I/O Support

The TCAN1044-Q1 is a high speed controller area network (CAN) transceiver that meets the physical layer requirements of the ISO 11898-2:2016 highspeed CAN specification.

The TCAN1044-Q1 transceiver supports both classical CAN and CAN FD networks up to 8 megabits per second (Mbps). The TCAN1044-Q1 includes internal logic level translation via the VIO terminal to allow for interfacing the transceiver I/Os directly to 1.8 V, 2.5 V, 3.3 V, or 5 V logic I/Os. The transceiver supports a low-power standby mode and wake over CAN compliant to the ISO 11898-2:2016 defined wake-up pattern (WUP). The TCAN1044-Q1 transceiver also includes protection and diagnostic features supporting thermal-shutdown (TSD), TXDdominant time-out (DTO), supply undervoltage detection, and bus fault protection up to ±58 V.


  • Previous:
  • Next:

  • • AEC-Q100: Qualified for automotive applications

    – Temperature grade 1: –40°C to 125°C TA

    • Meets the requirements of ISO 11898-2:2016 and ISO 11898-5:2007 physical layer standards

    • Functional Safety-Capable

    – Documentation available to aid functional safety system design

    • Support of classical CAN and optimized CAN FD performance at 2, 5, and 8 Mbps

    – Short and symmetrical propagation delays for enhanced timing margin

    – Higher data rates in loaded CAN networks

    • I/O voltage range supports 1.7 V to 5.5 V

    – Support for 1.8-V, 2.5-V, 3.3-V, and 5-V applications

    • Protection features:

    – Bus fault protection: ±58 V
    – Undervoltage protection
    – TXD-dominant time-out (DTO)

    • Data rates down to 9.2 kbps

    – Thermal-shutdown protection (TSD)

    • Operating modes:

    – Normal mode

    – Low power standby mode supporting remote wake-up request

    • Optimized behavior when unpowered

    – Bus and logic pins are high impedance (no load to operating bus or application)

    – Hot-plug capable: power up/down glitch free operation on bus and RXD output

    • Junction temperatures from: –40°C to 150°C

    • Receiver common mode input voltage: ±12 V

    • Available in SOIC (8), SOT23 (8) packages (2.9 mm x 1.60 mm) and leadless VSON (8) packages (3.0 mm x 3.0 mm) with improved automated optical inspection (AOI) capability

    • Automotive and Transportation

    – Body control modules

    – Automotive gateway

    – Advanced driver assistance system (ADAS)

    – Infotainment

    Related Products