LT4256-2IS8#TRPBF Hot Swap Voltage Controllers Hot Swap +48V Auto-Retry

Short Description:

Manufacturers: Analog Devices
Product Category: Power Management ICs Voltage Regulators & Voltage Controllers
Data Sheet: LT4256-2IS8#TRPBF
Description: Hot Swap Voltage Controllers Hot Swap Contr. +48V Auto-Retry
RoHS status: RoHS Compliant


Product Detail

Features

Applications

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: Analog Devices Inc.
Product Category: Hot Swap Voltage Controllers
RoHS:  Details
Product: Controllers & Switches
Current Limit: Adjustable
Supply Voltage - Max: 80 V
Supply Voltage - Min: 10.8 V
Number of Channels: 1 Channel
Operating Supply Current: 1.8 mA
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 85 C
Mounting Style: SMD/SMT
Package / Case: SOIC-8
Packaging: Reel
Packaging: Cut Tape
Packaging: MouseReel
Power Fail Detection: No
Brand: Analog Devices
Height: 1.75 mm
Product Type: Hot Swap Voltage Controllers
Series: LT4256-1
Factory Pack Quantity: 2500
Subcategory: PMIC - Power Management ICs
Unit Weight: 0.006860 oz

♠ LT4256-1/LT4256-2 Positive High Voltage Hot Swap Controllers

The LT® 4256-1/LT4256-2 are high voltage Hot SwapTM controllers that allow a board to be safely inserted and removed from a live backplane. An internal driver drives an external N-channel MOSFET switch to control supply voltages ranging from 10.8V to 80V.

The LT4256-1/LT4256-2 features an adjustable analog foldback current limit. If the supply remains in current limit for more than a programmable time, the N-channel MOSFET shuts off and the PWRGD output asserts low. The LT4256-2 automatically restarts after a time-out delay. The LT4256-1 latches off until the UV pin is cycled low.

The PWRGD output indicates when the output voltage rises above a programmed level. An external resistor string from VCC provides programmable undervoltage protection.

The LT4256 can be used as an upgrade to LT1641 designs. See Table 1 on page 14 for upgraded specifications.

The LT4256-1 and LT4256-2 are available in an 8-pin SO package that is pin compatible with the LT1641.


  • Previous:
  • Next:

  • ■ Allows Safe Board Insertion and Removal from a Live Backplane

    ■ Controls Supply Voltage from 10.8V to 80V

    ■ Foldback Current Limiting

    ■ Overcurrent Fault Detection

    ■ Drives an External N-Channel MOSFET

    ■ Programmable Supply Voltage Power-Up Rate

    ■ Undervoltage Protection

    ■ Latch Off Operation Mode (LT4256-1)

    ■ Automatic Retry (LT4256-2)

    ■ Available in an 8-Pin SO Package

    ■ Hot Board Insertion

    ■ Electronic Circuit Breaker/Power Bussing

    ■ Industrial High Side Switch/Circuit Breaker

    ■ 24V/48V Industrial/Alarm Systems

    ■ Ideally Suited for 12V, 24V and 48V Distributed Power Systems

    ■ 48V Telecom Systems

    Related Products