MAX20086ATPA/VY+T Current & Power Monitors & Regulators Quad Channel Camera Protector
♠ Product Description
Product Attribute | Attribute Value |
Manufacturer: | Maxim Integrated |
Product Category: | Current & Power Monitors & Regulators |
Product: | Current and Power Monitors |
Sensing Method: | High Side |
Supply Voltage - Max: | 15 V |
Supply Voltage - Min: | 3 V |
Operating Supply Current: | 2 mA |
Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 125 C |
Mounting Style: | SMD/SMT |
Package / Case: | TQFN-20 |
Packaging: | Reel |
Packaging: | Cut Tape |
Packaging: | MouseReel |
Brand: | Maxim Integrated |
Input Voltage Range: | 3 V to 15 V |
Output Current: | 600 mA |
Product Type: | Current & Power Monitors & Regulators |
Series: | MAX20086 |
Factory Pack Quantity: | 2500 |
Subcategory: | PMIC - Power Management ICs |
♠ Dual/Quad Camera Power Protectors
The MAX20086–MAX20089 dual/quad camera power protector ICs deliver up to 600mA load current to each of their four output channels. Each output is individually protected from short-to-battery, short-to-ground, and overcurrent conditions. The ICs operate from a 3V to 5.5V supply and with a 3V to 15V camera supply. The input-to-output voltage drop is only 110mV (typ) at 300mA.
The ICs provide an enable input and I2C interface to read the diagnostic status of the device. An on-board ADC enables reading of the current through each switch. The ASIL B- and ASIL D-compliant versions include support for reading an additional seven diagnostic measurements through the ADC, ensuring high-fault coverage.
The MAX20086–MAX20089 include overtemperature shutdown and overcurrent limiting on each output channel separately. All devices are designed to operate from -40°C to +125°C ambient temperature.
● Small Solution
• Up to Four 600mA Protection Switches
• 3V to 15V Input Supply
• 3V to 5.5V Device Supply
• 26V Short-to-Battery Isolation
• Adjustable Current Limit (100mA to 600mA)
• Selectable I2C Addresses
• Small (4mm x 4mm) 20-Pin SWTQFN Package
● Precision
• ±8% Current-Limit Accuracy
• 0.5ms Soft-Start
• 0.25ms Soft-Shutdown
• 0.3µA Shutdown Current
• 110mV Drop at 300mA
● Designed for Safety Applications
• ASIL B/D Compliant
• Short to VBAT/GND Diagnostics
• Differential Output Over/Undervoltage Diagnostics
• Input Over/Undervoltage Diagnostics
• Individual 8-Bit Current, Output Voltage, and Supply Readings Over I2C
• Autoretry on Fault
● AEC-Q100, -40°C to +125°C
● Power-over-Coax for Radar and Camera Modules