PI4MSD5V9543ALEX Switch ICs – Various 2 Channel I2C Bus Switch
♠ Product Description
Product Attribute | Attribute Value |
Manufacturer: | Diodes Incorporated |
Product Category: | Switch ICs - Various |
Product: | Bus Switches |
Number of Switches: | 2 Switch |
Configuration: | 2 x SPDT |
On Resistance - Max: | 70 Ohms |
Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 85 C |
Mounting Style: | SMD/SMT |
Package / Case: | TSSOP-14 |
Packaging: | Reel |
Packaging: | Cut Tape |
Brand: | Diodes Incorporated |
Off Time - Max: | 300 ns |
On Time - Max: | 300 ns |
Pd - Power Dissipation: | 100 mW |
Product Type: | Switch ICs - Various |
Factory Pack Quantity: | 2500 |
Subcategory: | Switch ICs |
Supply Current - Max: | 100 uA |
Supply Voltage - Max: | 5.5 V |
Supply Voltage - Min: | 1.65 V |
Unit Weight: | 0.006102 oz |
♠ 2 Channel I2C bus switch with interrupt logic and Reset
The PI4MSD5V9543A is a bidirectional translating switch, controlled by the I2C bus. The SCL/SDA channels. Any individual SCx/SDx channels or combination of channels can be selected, determined by contents of the programmable control register. Two upstream pair fans out to two downstream pairs, or the interrupt inputs, INT0 and INT1, one for each of the downstream pairs, are provided. One interrupt output, INT, which acts as an AND of the two interrupt inputs, is provided.
An active LOW reset input allows the PI4MSD5V9543A to recover from a situation where one of the downstream buses is stuck in a LOW state. Pulling the RESET pin LOW resets the I2C bus state machine and causes all the channels to be deselected, as does the internal power-on reset function.
The pass gates of the switches are constructed such that the VCC pin can be used to limit the maximum high voltage which will be passed by the PI4MSD5V9543A. This allows the use of different bus voltages on each SCx/SDx pair, so that 1.2V,1.8 V, 2.5 V, or 3.3 V parts can communicate with 5 V parts without any additional protection. External pull-up resistors pull the bus up to the desired voltage level for each channel. All I/O pins are 5 V tolerant.
• 1-of-2 bidirectional translating multiplexer
• I2C-bus interface logic
• Operating power supply voltage:1.65 V to 5.5 V
• Allows voltage level translation between 1.2V, 1.8V,2.5 V, 3.3 V and 5 V buses
• Low standby current
• Low Ron switches
• Channel selection via I2C bus
• Power-up with all multiplexer channels deselected
• Capacitance isolation when channel disabled
• No glitch on power-up
• Supports hot insertion
• 5 V tolerant inputs
• 0 Hz to 400 kHz clock frequency
• ESD protection exceeds 8000 V HBM per JESD22- A114, and 1000 V CDM per JESD22-C101
• Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
• Packages offered: SOIC-14W,TSSOP-14L