PIC32MX795F512L-80I/PT 32bit Microcontrollers MCU 512KB Flash 128KB USB ENET

Short Description:

Manufacturers: Microchip Technology
Product Category: Embedded – Microcontrollers
Data Sheet: PIC32MX795F512L-80I/PT
Description: IC MCU 32BIT 512KB FLASH 100TQFP
RoHS status: RoHS Compliant


Product Detail

Features

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: Microchip
Product Category: 32-bit Microcontrollers - MCU
RoHS:  Details
Series: PIC32MX7xx
Mounting Style: SMD/SMT
Package / Case: TQFP-100
Core: MIPS32 M4K
Program Memory Size: 512 kB
Data RAM Size: 128 kB
Data Bus Width: 32 bit
ADC Resolution: 10 bit
Maximum Clock Frequency: 80 MHz
Number of I/Os: 85 I/O
Supply Voltage - Min: 2.3 V
Supply Voltage - Max: 3.6 V
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 85 C
Packaging: Tray
Brand: Microchip Technology / Atmel
Data RAM Type: RAM
Height: 1 mm
Interface Type: CAN, I2C, SPI, UART, USB
Length: 12 mm
Moisture Sensitive: Yes
Number of ADC Channels: 16 Channel
Number of Timers/Counters: 5 Timer
Processor Series: PIC32MX7
Product: MCU
Product Type: 32-bit Microcontrollers - MCU
Program Memory Type: Flash
Factory Pack Quantity: 119
Subcategory: Microcontrollers - MCU
Tradename: MIPS32
Watchdog Timers: Watchdog Timer
Width: 12 mm
Unit Weight: 0.023175 oz

  • Previous:
  • Next:

  • Operating Conditions
    • 2.3V to 3.6V, -40ºC to +105ºC, DC to 80 MHz Core: 80 MHz/105 DMIPS MIPS32® M4K®
    • MIPS16e® mode for up to 40% smaller code size
    • Code-efficient (C and Assembly) architecture
    • Single-cycle (MAC) 32×16 and two-cycle 32×32 multiply

    Clock Management
    • 0.9% internal oscillator (on some variants)
    • Programmable PLLs and oscillator clock sources
    • Fail-Safe Clock Monitor (FSCM)
    • Independent Watchdog Timer
    • Fast wake-up and start-up

    Power Management
    • Low-power management modes (Sleep and Idle)
    • Integrated Power-on Reset, Brown-out Reset
    • 0.5 mA/MHz dynamic current (typical)
    • 41 µA IPD current (typical)

    Graphics Features
    • External graphics interface with up to 34 Parallel Master Port (PMP) pins:
    - Interface to external graphics controller
    - Capable of driving LCD directly with DMA and internal or external memory

    Analog Features
    • ADC Module:
    - 10-bit 1 Msps rate with one Sample and Hold (S&H)
    - 16 analog inputs
    - Can operate during Sleep mode
    • Flexible and independent ADC trigger sources
    • Comparators:
    - Two dual-input Comparator modules
    - Programmable references with 32 voltage points

    Timers/Output Compare/Input Capture
    • Five General Purpose Timers:
    - Five 16-bit and up to two 32-bit Timers/Counters
    • Five Output Compare (OC) modules
    • Five Input Capture (IC) modules
    • Real-Time Clock and Calendar (RTCC) module

    Communication Interfaces
    • USB 2.0-compliant Full-Speed OTG controller
    • 10/100 Mbps Ethernet MAC with MII and RMII interface
    • CAN module:
    - 2.0B Active with DeviceNet™ addressing support
    • Six UART modules (20 Mbps):
    - Supports LIN 2.1 protocols and IrDA® support
    • Up to four 4-wire SPI modules (25 Mbps)
    • Up to five I2C modules (up to 1 Mbaud) with SMBus support
    • Parallel Master Port (PMP)

    Direct Memory Access (DMA)
    • Up to eight channels of hardware DMA with automatic data size detection
    • 32-bit Programmable Cyclic Redundancy Check (CRC)
    • Six additional channels dedicated to USB, Ethernet and CAN modules

    Input/Output
    • 15 mA or 10 mA source/sink for standard VOH/VOL and up to 22 mA for non-standard VOH1
    • 5V-tolerant pins
    • Selectable open drain and pull-ups
    • External interrupts

    Class B Support
    • Class B Safety Library, IEC 60730 Debugger Development Support
    • In-circuit and in-application programming
    • 4-wire MIPS® Enhanced JTAG interface
    • Unlimited program and six complex data breakpoints
    • IEEE 1149.2-compatible (JTAG) boundary scan

    Related Products