S9KEAZ128AMLH ARM Microcontrollers – MCU Kinetis E 32-bit MCU, ARM Cortex-M4 core, 128KB Flash, 48MHz, QFP 64
♠ Product Description
Product Attribute | Attribute Value |
Manufacturer: | NXP |
Product Category: | ARM Microcontrollers - MCU |
RoHS: | Details |
Series: | KEA128 |
Mounting Style: | SMD/SMT |
Package / Case: | LQFP-64 |
Core: | ARM Cortex M0+ |
Program Memory Size: | 128 kB |
Data Bus Width: | 32 bit |
ADC Resolution: | 12 bit |
Maximum Clock Frequency: | 48 MHz |
Number of I/Os: | 71 I/O |
Data RAM Size: | 16 kB |
Supply Voltage - Min: | 2.7 V |
Supply Voltage - Max: | 5.5 V |
Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 125 C |
Qualification: | AEC-Q100 |
Packaging: | Tray |
Brand: | NXP Semiconductors |
DAC Resolution: | 6 bit |
Data RAM Type: | RAM |
Interface Type: | I2C, SPI, UART |
Moisture Sensitive: | Yes |
Number of Timers/Counters: | 6 Timer |
Processor Series: | KEA128 |
Product: | MCU |
Product Type: | ARM Microcontrollers - MCU |
Program Memory Type: | Flash |
Factory Pack Quantity: | 800 |
Subcategory: | Microcontrollers - MCU |
Watchdog Timers: | Watchdog Timer |
Part # Aliases: | 935325897557 |
Unit Weight: | 0.012224 oz |
• Operating characteristics
– Voltage range: 2.7 to 5.5 V
– Flash write voltage range: 2.7 to 5.5 V
– Temperature range (ambient): -40 to 125°C
• Performance
– Up to 48 MHz Arm® Cortex-M0+ core
– Single cycle 32-bit x 32-bit multiplier
– Single cycle I/O access port
• Memories and memory interfaces ‘
– Up to 128 KB flash
– Up to 16 KB RAM
• Clocks
– Oscillator (OSC) – supports 32.768 kHz crystal or 4 MHz to 24 MHz crystal or ceramic resonator; choice of low power or high gain oscillators
– Internal clock source (ICS) – internal FLL with internal or external reference, 37.5 kHz pre-trimmed internal reference for 48 MHz system clock
– Internal 1 kHz low-power oscillator (LPO)
• System peripherals
– Power management module (PMC) with three power modes: Run, Wait, Stop
– Low-voltage detection (LVD) with reset or interrupt, selectable trip points
– Watchdog with independent clock source (WDOG)
– Programmable cyclic redundancy check module (CRC)
– Serial wire debug interface (SWD)
– Aliased SRAM bitband region (BIT-BAND)
– Bit manipulation engine (BME)
• Security and integrity modules
– 80-bit unique identification (ID) number per chip • Human-machine interface
– Up to 57 general-purpose input/output (GPIO)
– Up to 37 general-purpose input/output (GPIO)
– Up to 22 general-purpose input/output (GPIO)
– Up to 14 general-purpose input/output (GPIO)
– Up to 71 general-purpose input/output (GPIO)
– Two 32-bit keyboard interrupt modules (KBI)
– External interrupt (IRQ)
• Analog modules
– One up to 16-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC)
– Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)
• Timers
– One 6-channel FlexTimer/PWM (FTM)
– Two 2-channel FlexTimer/PWM (FTM)
– One 2-channel periodic interrupt timer (PIT)
– One pulse width timer (PWT)
– One real-time clock (RTC)
• Communication interfaces
– Two SPI modules (SPI)
– Up to three UART modules (UART)
– Two I2C modules (I2C)
– One MSCAN module (MSCAN)
• Package options
– 80-pin LQFP
– 64-pin LQFP