STM32F101VCT6 ARM Microcontrollers MCU 32BIT Cortex M3 H/D ACCESS USB MCU

Short Description:

Manufacturers: STMicroelectronics
Product Category: Embedded – Microcontrollers
Data Sheet: STM32F101VCT6
Description: IC MCU 32BIT 256KB FLASH 100LQFP
RoHS status: RoHS Compliant


Product Detail

Features

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: STMicroelectronics
Product Category: ARM Microcontrollers - MCU
RoHS:  Details
Series: STM32F101VC
Mounting Style: SMD/SMT
Package / Case: LQFP-100
Core: ARM Cortex M3
Program Memory Size: 256 kB
Data Bus Width: 32 bit
ADC Resolution: 12 bit
Maximum Clock Frequency: 36 MHz
Number of I/Os: 80 I/O
Data RAM Size: 32 kB
Supply Voltage - Min: 2 V
Supply Voltage - Max: 3.6 V
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 85 C
Packaging: Tray
Brand: STMicroelectronics
Data RAM Type: SRAM
Height: 1.4 mm
Interface Type: I2C, SPI, USART
Length: 14 mm
Moisture Sensitive: Yes
Number of ADC Channels: 16 Channel
Number of Timers/Counters: 6 Timer
Processor Series: ARM Cortex M
Product Type: ARM Microcontrollers - MCU
Program Memory Type: Flash
Factory Pack Quantity: 540
Subcategory: Microcontrollers - MCU
Tradename: STM32
Width: 14 mm
Unit Weight: 0.046530 oz

♠ High-density access line, ARM®-based 32-bit MCU with 256 KB to 512 MB Flash, 9 timers, 1 ADC and 10 communication interfaces

The STM32F101xC, STM32F101xD and STM32F101xE access line family incorporates the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a 36 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 48 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer one 12-bit ADC, four general-purpose 16-bit timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs and five USARTs.

The STM32F101xx high-density access line family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.

These features make the STM32F101xx high-density access line microcontroller family suitable for a wide range of applications such as medical and handheld equipment, PC peripherals and gaming, GPS platforms, industrial applications, PLC, printers, scanners alarm systems and video intercom.


  • Previous:
  • Next:

  • • Core: ARM® 32-bit Cortex®-M3 CPU
    – 24 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance
    – Single-cycle multiplication and hardware division

    • Memories
    – 16 to 128 Kbytes of Flash memory
    – 4 to 8 Kbytes of SRAM

    • Clock, reset and supply management
    – 2.0 to 3.6 V application supply and I/Os
    – POR, PDR and programmable voltage detector (PVD)
    – 4-to-24 MHz crystal oscillator
    – Internal 8 MHz factory-trimmed RC
    – Internal 40 kHz RC
    – PLL for CPU clock
    – 32 kHz oscillator for RTC with calibration

    • Low power
    – Sleep, Stop and Standby modes
    – VBAT supply for RTC and backup registers

    • Debug mode
    – Serial wire debug (SWD) and JTAG interfaces

    • DMA
    – 7-channel DMA controller
    – Peripherals supported: timers, ADC, SPIs, I2Cs, USARTs and DACs

    • 1 × 12-bit, 1.2 µs A/D converter (up to 16 channels)
    – Conversion range: 0 to 3.6 V
    – Temperature sensor

    • 2 × 12-bit D/A converters

    • Up to 80 fast I/O ports
    – 37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

    • Up to 12 timers
    – Up to three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter
    – 16-bit, 6-channel advanced-control timer: up to 6 channels for PWM output, dead time generation and emergency stop
    – One 16-bit timer, with 2 IC/OC, 1 OCN/PWM, dead-time generation and emergency stop
    – Two 16-bit timers, each with IC/OC/OCN/PWM, dead-time generation and emergency stop
    – 2 watchdog timers (Independent and Window)
    – SysTick timer: 24-bit downcounter
    – Two 16-bit basic timers to drive the DAC

    • Up to 8 communications interfaces
    – Up to two I2C interfaces (SMBus/PMBus)
    – Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
    – Up to 2 SPIs (12 Mbit/s)
    – Consumer electronics control (CEC) interface

    • CRC calculation unit, 96-bit unique ID

    • ECOPACK® packages

    Related Products