STM32F205RET6TR ARM Microcontrollers – MCU Hi-perf ARM Cortex M3 MCU 512Kb

Short Description:

Manufacturers: STMicroelectronics
Product Category:ARM Microcontrollers – MCU
Data Sheet:STM32F205RET6TR 
Description: Microcontrollers – MCU
RoHS status: RoHS Compliant


Product Detail

Features

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: STMicroelectronics
Product Category: ARM Microcontrollers - MCU
RoHS:  Details
Series: STM32F205RE
Mounting Style: SMD/SMT
Package / Case: LQFP-64
Core: ARM Cortex M3
Program Memory Size: 512 kB
Data Bus Width: 32 bit
ADC Resolution: 12 bit
Maximum Clock Frequency: 120 MHz
Number of I/Os: 51 I/O
Data RAM Size: 128 kB
Supply Voltage - Min: 1.8 V
Supply Voltage - Max: 3.6 V
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 85 C
Packaging: Reel
Packaging: Cut Tape
Packaging: MouseReel
Brand: STMicroelectronics
Data RAM Type: SRAM
Data ROM Size: 512 B
Moisture Sensitive: Yes
Processor Series: ARM Cortex M
Product Type: ARM Microcontrollers - MCU
Program Memory Type: Flash
Factory Pack Quantity: 1000
Subcategory: Microcontrollers - MCU
Tradename: STM32
Unit Weight: 0.012088 oz

♠ Arm®-based 32-bit MCU, 150 DMIPs, up to 1 MB Flash/128+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces and camera

The STM32F20x family is based on the high-performance Arm® Cortex®-M3 32-bit RISC core operating at a frequency of up to 120 MHz. The family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 128 Kbytes of system SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.

The devices also feature an adaptive real-time memory accelerator (ART Accelerator™) that allows to achieve a performance equivalent to 0 wait state program execution from Flash memory at a CPU frequency up to 120 MHz. This performance has been validated using the CoreMark® benchmark.


  • Previous:
  • Next:

  • ■ Core: Arm® 32-bit Cortex®-M3 CPU (120 MHz max) with Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution performance from Flash memory, MPU, 150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)

    ■ Memories

      – Up to 1 Mbyte of Flash memory

      – 512 bytes of OTP memory

      – Up to 128 + 4 Kbytes of SRAM 

      – Flexible static memory controller that supports Compact Flash, SRAM, PSRAM, NOR and NAND memories

      – LCD parallel interface, 8080/6800 modes

    ■ Clock, reset and supply management

      – From 1.8 to 3.6 V application supply + I/Os

      – POR, PDR, PVD and BOR

      – 4 to 26 MHz crystal oscillator

      – Internal 16 MHz factory-trimmed RC

      – 32 kHz oscillator for RTC with calibration

      – Internal 32 kHz RC with calibration

    ■ Low-power modes

      – Sleep, Stop and Standby modes

      – VBAT supply for RTC, 20 × 32 bit backup registers, and optional 4 Kbytes backup SRAM

    ■ 3 × 12-bit, 0.5 µs ADCs with up to 24 channels and up to 6 MSPS in triple interleaved mode

    ■ 2 × 12-bit D/A converters

    ■ General-purpose DMA: 16-stream controller with centralized FIFOs and burst support

    ■ Up to 17 timers

      – Up to twelve 16-bit and two 32-bit timers, up to 120 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

    ■ Debug mode: Serial wire debug (SWD), JTAG, and Cortex®-M3 Embedded Trace Macrocell™

    ■ Up to 140 I/O ports with interrupt capability:

      – Up to 136 fast I/Os up to 60 MHz

      – Up to 138 5 V-tolerant I/Os

    ■ Up to 15 communication interfaces

      – Up to three I2C interfaces (SMBus/PMBus)

      – Up to four USARTs and two UARTs (7.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)

      – Up to three SPIs (30 Mbit/s), two with muxed I2S to achieve audio class accuracy via audio PLL or external PLL

      – 2 × CAN interfaces (2.0B Active)

      – SDIO interface

    ■ Advanced connectivity

      – USB 2.0 full-speed device/host/OTG controller with on-chip PHY

      – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI

      – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

    ■ 8- to 14-bit parallel camera interface (48 Mbyte/s max.)

    ■ CRC calculation unit

    ■ 96-bit unique ID

    Related Products