STM8S003F3P6TR 8-bit Microcontrollers – MCU 8-Bit MCU Value Line 8kB Flash 16MHz EE
♠ Product Description
Product Attribute | Attribute Value |
Manufacturer: | STMicroelectronics |
Product Category: | 8-bit Microcontrollers - MCU |
RoHS: | Details |
Series: | STM8S003F3 |
Mounting Style: | SMD/SMT |
Package/Case: | TSSOP-20 |
Core: | STM8 |
Program Memory Size: | 8 kB |
Data Bus Width: | 8 bit |
ADC Resolution: | 10 bit |
Maximum Clock Frequency: | 16 MHz |
Number of I/Os: | 16 I/O |
Data RAM Size: | 1 kB |
Supply Voltage - Min: | 2.95 V |
Supply Voltage - Max: | 5.5 V |
Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 85 C |
Packaging: | Reel |
Packaging: | Cut Tape |
Packaging: | MouseReel |
Brand: | STMicroelectronics |
Data RAM Type: | RAM |
Data ROM Size: | 128 B |
Data ROM Type: | EEPROM |
Interface Type: | I2C, SPI, UART |
Number of ADC Channels: | 5 Channel |
Number of Timers/Counters: | 3 Timer |
Processor Series: | STM8S |
Product Type: | 8-bit Microcontrollers - MCU |
Program Memory Type: | Flash |
Factory Pack Quantity: | 2500 |
Subcategory: | Microcontrollers - MCU |
Unit Weight: | 191 mg |
♠ Value line, 16-MHz STM8S 8-bit MCU, 8-Kbyte Flash memory, 128-byte data EEPROM, 10-bit ADC, 3 timers, UART, SPI, I²C
The STM8S003F3/K3 value line 8-bit microcontrollers offer 8 Kbytes of Flash program memory, plus integrated true data EEPROM. They are referred to as low-density devices in the STM8S microcontroller family reference manual (RM0016).
The STM8S003F3/K3 value line devices provide the following benefits: performance, robustness and reduced system cost.
Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system.
The system cost is reduced thanks to a high system integration level with internal clock oscillators, watchdog, and brown-out reset.
Full documentation is offered as well as a wide choice of development tools.
Core
• 16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline
• Extended instruction set
Memories
• Program memory: 8 Kbyte Flash memory; data retention 20 years at 55 °C after 100 cycles
• RAM: 1 Kbyte
• Data memory: 128 bytes true data EEPROM; endurance up to 100 k write/erase cycles
Clock, reset and supply management
• 2.95 V to 5.5 V operating voltage
• Flexible clock control, 4 master clock sources
– Low-power crystal resonator oscillator
– External clock input
– Internal, user-trimmable 16 MHz RC
– Internal low-power 128 kHz RC
• Clock security system with clock monitor
• Power management
– Low-power modes (wait, active-halt, halt)
– Switch-off peripheral clocks individually
– Permanently active, low-consumption power-on and power-down reset
Interrupt management
• Nested interrupt controller with 32 interrupts
• Up to 27 external interrupts on 6 vectors
Timers
• Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization
• 16-bit general purpose timer, with 3 CAPCOM channels (IC, OC or PWM)
• 8-bit basic timer with 8-bit prescaler
• Auto wakeup timer
• Window and independent watchdog timers
Communications interfaces
• UART with clock output for synchronous operation, SmartCard, IrDA, LIN master mode
• SPI interface up to 8 Mbit/s
• I 2C interface up to 400 Kbit/s
Analog to digital converter (ADC)
• 10-bit ADC, ± 1 LSB ADC with up to 5 multiplexed channels, scan mode and analog watchdog
I/Os
• Up to 28 I/Os on a 32-pin package including 21 high-sink outputs
• Highly robust I/O design, immune against current injection
Development support
• Embedded single-wire interface module (SWIM) for fast on-chip programming and non-intrusive debugging