STM8S207K8T6CTR 8-bit Microcontrollers – MCU 8-bit Performance LN 27 Mhz 64kb Flash
♠ Product Description
Product Attribute | Attribute Value |
Manufacturer: | STMicroelectronics |
Product Category: | 8-bit Microcontrollers - MCU |
RoHS: | Details |
Series: | STM8S207K8 |
Mounting Style: | SMD/SMT |
Core: | STM8 |
Program Memory Size: | 64 kB |
Data Bus Width: | 8 bit |
ADC Resolution: | 10 bit |
Maximum Clock Frequency: | 24 MHz |
Number of I/Os: | 25 I/O |
Data RAM Size: | 6 kB |
Supply Voltage - Min: | 2.95 V |
Supply Voltage - Max: | 5.5 V |
Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 85 C |
Packaging: | Reel |
Packaging: | Cut Tape |
Packaging: | MouseReel |
Brand: | STMicroelectronics |
Moisture Sensitive: | Yes |
Product Type: | 8-bit Microcontrollers - MCU |
Factory Pack Quantity: | 2400 |
Subcategory: | Microcontrollers - MCU |
Unit Weight: | 180 mg |
♠ Performance line, 24 MHz STM8S 8-bit MCU, up to 128 KB Flash, integrated EEPROM, 10-bit ADC, timers, 2 UARTs, SPI, I²C, CAN
The STM8S20xxx performance line 8-bit microcontrollers offer from 32 to 128 Kbytes Flash program memory. They are referred to as high-density devices in the STM8S microcontroller family reference manual.
All STM8S20xxx devices provide the following benefits: reduced system cost, performance robustness, short development cycles, and product longevity.
The system cost is reduced thanks to an integrated true data EEPROM for up to 300 k write/erase cycles and a high system integration level with internal clock oscillators, watchdog, and brown-out reset.
Device performance is ensured by 20 MIPS at 24 MHz CPU clock frequency and enhanced characteristics which include robust I/O, independent watchdogs (with a separate clock source), and a clock security system. Short development cycles are guaranteed due to application scalability across a common family product architecture with compatible pinout, memory map and modular peripherals. Full documentation is offered with a wide choice of development tools.
Product longevity is ensured in the STM8S family thanks to their advanced core which is made in a state-of-the art technology for applications with 2.95 V to 5.5 V operating supply
• Core
– Max fCPU: up to 24 MHz, 0 wait states @ fCPU ≤16 MHz
– Advanced STM8 core with Harvard architecture and 3-stage pipeline
– Extended instruction set
– Max 20 MIPS @ 24 MHz
• Memories
– Program: up to 128 Kbytes Flash; data retention 20 years at 55 °C after 10 kcycles
– Data: up to 2 Kbytes true data EEPROM; endurance 300 kcycles
– RAM: up to 6 Kbytes
• Clock, reset and supply management
– 2.95 to 5.5 V operating voltage
– Low power crystal resonator oscillator
– External clock input
– Internal, user-trimmable 16 MHz RC
– Internal low power 128 kHz RC
– Clock security system with clock monitor
– Wait, active-halt, & halt low power modes
– Peripheral clocks switched off individually
– Permanently active, low consumption power-on and power-down reset
• Interrupt management
– Nested interrupt controller with 32 interrupts
– Up to 37 external interrupts on 6 vectors
• Timers
– 2x 16-bit general purpose timers, with 2+3 CAPCOM channels (IC, OC or PWM)
– Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization
– 8-bit basic timer with 8-bit prescaler
– Auto wakeup timer
– Window watchdog, independent watchdog
• Communications interfaces
– High speed 1 Mbit/s active beCAN 2.0B
– UART with clock output for synchronous operation – LIN master mode
– UART with LIN 2.1 compliant, master/slave modes and automatic resynchronization
– SPI interface up to 10 Mbit/s – I2C interface up to 400 Kbit/s
• 10-bit ADC with up to 16 channels
• I/Os
– Up to 68 I/Os on an 80-pin package including 18 high sink outputs
– Highly robust I/O design, immune against current injection
– Development support
– Single wire interface module (SWIM) and debug module (DM)
• 96-bit unique ID key for each device