LM2775QDSGRQ1 Switching Voltage Regulators Automotive 2.7V to 5.5VIN 200mA

Short Description:

Manufacturers:Texas Instruments

Product Category:PMIC – Voltage Regulators – DC DC Switching Regulators

Data Sheet: LM2775QDSGRQ1 

Description:IC REG CHARG PUMP 5V 200MA 8WSON

RoHS status:RoHS Compliant


Product Detail

Features

Applications

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: Texas Instruments
Product Category: Switching Voltage Regulators
RoHS:  Details
Mounting Style: SMD/SMT
Package / Case: WSON-8
Topology: Boost
Output Voltage: 5 V
Output Current: 200 mA
Number of Outputs: 1 Output
Input Voltage, Min: 2.7 V
Input Voltage, Max: 5.5 V
Quiescent Current: 75 uA
Switching Frequency: 2 MHz
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 125 C
Qualification: AEC-Q100
Series: LM2775-Q1
Packaging: Reel
Packaging: Cut Tape
Packaging: MouseReel
Brand: Texas Instruments
Development Kit: LM2775EVM
Input Voltage: 2.7 V to 5.5 V
Moisture Sensitive: Yes
Product Type: Switching Voltage Regulators
Shutdown: Shutdown
Factory Pack Quantity: 3000
Subcategory: PMIC - Power Management ICs
Supply Voltage - Min: 2.7 V
Type: Switched Capacitor Boost Converter
Unit Weight: 0.000416 oz

♠ LM2775-Q1 Switched Capacitor 5-V Boost Converter

The LM2775-Q1 is a regulated switched-capacitor doubler that produces a low-noise output voltage. The LM2775-Q1 can supply up to 200 mA of output current over a 3.1-V to 5.5-V input range, as well as up to 125 mA of output current when the input voltage is as low as 2.7 V. The LM2775-Q1 provides a cost-optimized 5V, 200mA supply for powering CAN transceivers and other loads, boosting from a regulated 3.3-V system rail. It can be used as a postboost in automotive systems that do not use a wide input voltage pre-boost or cold crank. At low output currents, the LM2775-Q1 can reduce its quiescent current by operating in a pulse frequency modulation (PFM) mode. PFM mode can be enabled or disabled by driving the PFM pin to high or low. Additionally, when the device is in shutdown, the user can chose to have the output voltage pulled to GND or left in a high impedance state by setting the OUTDIS pin high or low.

The LM2775-Q1 has been placed in TI's 8-pin WSON, a package with excellent thermal properties that keeps the part from overheating under almost all rated operating conditions.


  • Previous:
  • Next:

  • • Qualified for automotive applications

    • AEC-Q100 qualified with the following results

    – Device temperature grade 1: –40°C to +125°C ambient operating temperature range

    • 2.7-V to 5.5-V input range

    • Fixed 5-V output

    • 200-mA output current

    • Inductor-less solution: only requires 3 small ceramic capacitors

    • Shutdown disconnects load from VIN

    • Current limit and thermal protection

    • 2-MHz switching frequency

    • PFM operation during light load currents (PFM pin tied high)

    • Power for CAN transceiver

    • Millimeter wave radar

    • ADAS camera power supply

    Related Products