TLV9004IPWR Operational Amplifiers – Op Amps 4-Channel, 1MHz, RRIO, 1.8V to 5.5V Operational Amplifier for Cost-Optimized Systems 14-TSSOP -40 to 125
♠ Product Description
Product Attribute | Attribute Value |
Manufacturer: | Texas Instruments |
Product Category: | Operational Amplifiers - Op Amps |
RoHS: | Details |
Mounting Style: | SMD/SMT |
Package / Case: | TSSOP-14 |
Number of Channels: | 4 Channel |
Supply Voltage - Max: | 5.5 V |
GBP - Gain Bandwidth Product: | 1 MHz |
Output Current per Channel: | 40 mA |
SR - Slew Rate: | 2 V/us |
Vos - Input Offset Voltage: | 1.6 mV |
Supply Voltage - Min: | 1.8 V |
Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 125 C |
Ib - Input Bias Current: | 5 pA |
Operating Supply Current: | 60 uA |
Shutdown: | Shutdown |
CMRR - Common Mode Rejection Ratio: | 77 dB |
en - Input Voltage Noise Density: | 30 nV/sqrt Hz |
Series: | TLV9004 |
Packaging: | Reel |
Packaging: | Cut Tape |
Packaging: | MouseReel |
3 dB Bandwidth: | - |
Amplifier Type: | General Purpose Operational Amplifier |
Brand: | Texas Instruments |
In - Input Noise Current Density: | 23 fA/sqrt Hz |
Input Type: | Rail-to-Rail |
Ios - Input Offset Current: | 2 pA |
Maximum Dual Supply Voltage: | +/- 2.75 V |
Minimum Dual Supply Voltage: | +/- 0.9 V |
Moisture Sensitive: | Yes |
Output Type: | Rail-to-Rail |
Product: | Operational Amplifiers |
Product Type: | Op Amps - Operational Amplifiers |
PSRR - Power Supply Rejection Ratio: | 105 dB |
Factory Pack Quantity: | 2000 |
Subcategory: | Amplifier ICs |
THD plus Noise: | 0.004 % |
Unit Weight: | 0.002180 oz |
♠ TLV900x Low-Power, RRIO, 1-MHz Operational Amplifier for Cost-Sensitive Systems
The TLV900x family includes single (TLV9001), dual (TLV9002), and quad-channel (TLV9004) low-voltage (1.8 V to 5.5 V) operational amplifiers (op amps) with rail-to-rail input and output swing capabilities. These op amps provide a cost-effective solution for space-constrained applications such as smoke detectors, wearable electronics, and small appliances where low-voltage operation and high capacitive-load drive are required. The capacitive-load drive of the TLV900x family is 500 pF, and the resistive openloop output impedance makes stabilization easier with much higher capacitive loads. These op amps are designed specifically for low-voltage operation (1.8 V to 5.5 V) with performance specifications similar to the TLV600x devices.
The robust design of the TLV900x family simplifies circuit design. The op amps feature unity-gain stability, an integrated RFI and EMI rejection filter, and no-phase reversal in overdrive conditions.
The TLV900x devices include a shutdown mode (TLV9001S, TLV9002S, and TLV9004S) that allow the amplifiers to switch off into standby mode with typical current consumption less than 1 µA.
Micro-size packages, such as SOT-553 and WSON, are offered for all channel variants (single, dual, and quad), along with industry-standard packages such as SOIC, MSOP, SOT-23, and TSSOP packages.
• Scalable CMOS amplifier for low-cost applications
• Rail-to-rail input and output
• Low input offset voltage: ±0.4 mV
• Unity-gain bandwidth: 1 MHz
• Low broadband noise: 27 nV/√Hz
• Low input bias current: 5 pA
• Low quiescent current: 60 µA/Ch
• Unity-gain stable
• Internal RFI and EMI filter
• Operational at supply voltages as low as 1.8 V
• Easier to stabilize with higher capacitive load due to resistive open-loop output impedance
• Extended temperature range: –40°C to 125°C
• Sensor signal conditioning
• Power modules
• Active filters
• Low-side current sensing
• Smoke detectors
• Motion detectors
• Wearable devices
• Large and small appliances
• EPOS
• Barcode scanners
• Personal electronics
• HVAC: heating, ventilating, and air conditioning
• Motor control: AC induction