TPS54336ADDAR Switching Voltage Regulators 4.5-28V Input 3A 340kHz

Short Description:

Manufacturers: Texas Instruments
Product Category: PMIC – Voltage Regulators – DC DC Switching Regulators
Data Sheet: TPS54336ADDAR
Description: IC REG BUCK ADJUSTABLE 3A 8SOPWR
RoHS status: RoHS Compliant


Product Detail

Features

Applications

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: Texas Instruments
Product Category: Switching Voltage Regulators
RoHS:  Details
Mounting Style: SMD/SMT
Package / Case: SO-PowerPad-8
Topology: Buck
Output Voltage: 800 mV to 24 V
Output Current: 3 A
Number of Outputs: 1 Output
Input Voltage, Min: 4.5 V
Input Voltage, Max: 28 V
Quiescent Current: 2 uA
Switching Frequency: 340 kHz
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 150 C
Series: TPS54336A
Packaging: Reel
Packaging: Cut Tape
Packaging: MouseReel
Brand: Texas Instruments
Height: 1.7 mm
Length: 4.9 mm
Moisture Sensitive: Yes
Operating Supply Current: 600 uA
Product Type: Switching Voltage Regulators
Factory Pack Quantity: 2500
Subcategory: PMIC - Power Management ICs
Width: 3.9 mm
Unit Weight: 0.004325 oz

♠ TPS5433xA 4.5-V to 28-V Input, 3-A Output, Synchronous Step-Down DC-DC Converter

The TPS5433xA family of devices are synchronous converters with an input-voltage range of 4.5 V to 28 V. These devices include This device has an integrated low-side switching FET that eliminates the need for an external diode which reduces component count.

Efficiency is maximized through the integrated 128- mΩ and 84-mΩ MOSFETs, low IQ and pulse skipping at light loads. Using the enable pin, the shutdown supply current is reduced to 2 μA. This step-down (buck) converter provides accurate regulation for a variety of loads with a well-regulated voltage reference that is 1.5% over temperature.

Cycle-by-cycle current limiting on the high-side MOSFET protects the TPS5433xA family of devices in overload situations and is enhanced by a low-side sourcing current limit which prevents current runaway. A low-side sinking current-limit turns off the low-side MOSFET to prevent excessive reverse current. Hiccup protection is triggered if the overcurrent condition continues for longer than the preset time. Thermal shutdown disables the device when the die temperature exceeds the threshold and enables the device again after the built-in thermal hiccup time.


  • Previous:
  • Next:

  • • Synchronous 128-mΩ and 84-mΩ MOSFETs for 3-A Continuous Output Current

    • TPS54335A: Internal 2-ms Soft-Start, 50-kHz to 1.5-MHz Adjustable Frequency

    • TPS54336A: Adjustable Soft-Start, Fixed 340-kHz Frequency

    • Low 2-µA Shutdown, Quiescent Current

    • 0.8-V Voltage Reference with ±0.8% Accuracy

    • Current Mode Control

    • Monotonic Startup into Pre-Biased Outputs

    • Pulse Skipping for Light-Load Efficiency

    • Hiccup Mode Overcurrent Protection

    • Thermal Shutdown (TSD) and Overvoltage Transition Protection

    • 8-Pin SO PowerPAD™ and 10-Pin VSON Package

    • Create a Custom Design Using the TPS54335A with the WEBENCH Power Designer

    • Consumer Applications such as a Digital TV (DTV), Set Top Box (STB, DVD/Blu-ray Player), LCD Display, CPE (Cable Modem, WiFi Router), DLP Projectors, Smart Meters

    • Battery Chargers

    • Industrial and Car Audio Power Supplies

    • 5-V, 12-V, and 24-V Distributed Power Bus Supply

    Related Products