TPS61088RHLR Switching Voltage Regulators 10-A Fully-Integrated Synchronous Boost Converter 20-VQFN -40 to 85

Short Description:

Manufacturers: Texas Instruments 
Product Category: Switching Voltage Regulators
Data Sheet: TPS61088RHLR
Description: IC REG BOOST ADJ 10A 20VQFN
RoHS status: RoHS Compliant


Product Detail

Features

Applications

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: Texas Instruments
Product Category: Switching Voltage Regulators
RoHS:  Details
Mounting Style: SMD/SMT
Package/Case: VQFN-20
Topology: Boost
Output Voltage: 4.5 V to 12.6 V
Output Current: 11.9 A
Number of Outputs: 1 Output
Input Voltage, Min: 2.7 V
Input Voltage, Max: 12 V
Quiescent Current: 1 mA
Switching Frequency: 500 kHz
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 85 C
Series: TPS61088
Packaging: Reel
Packaging: Cut Tape
Packaging: MouseReel
Brand: Texas Instruments
Input Voltage: 2.7 V to 12 V
Moisture Sensitive: Yes
Operating Supply Current: 110 uA
Product Type: Switching Voltage Regulators
Shutdown: Shutdown
Factory Pack Quantity: 3000
Subcategory: PMIC - Power Management ICs
Supply Voltage - Min: 2.7 V
Type: Synchronous Boost Converter
Unit Weight: 70 mg

♠ TPS61088 10-A Fully-Integrated Synchronous Boost Converter

The TPS61088 is a high-power density, fully-integrated synchronous boost converter with a 11-mΩ power switch and a 13-mΩ rectifier switch to provide a high efficiency and small size solution in portable systems. The TPS61088 has a wide input voltage range from 2.7 V to 12 V to support applications with single-cell or two-cell Lithium batteries. The device has 10-A switch current capability and is capable of providing an output voltage up to 12.6 V.

The TPS61088 uses adaptive constant off-time peak current control topology to regulate the output voltage. In moderate to heavy load condition, the TPS61088 works in pulse width modulation (PWM) mode. In light load condition, the device has two operation modes selected by the MODE pin. One is the pulse frequency modulation (PFM) mode to improve the efficiency and another one is forced PWM mode to avoid application problems caused by low switching frequency. The switching frequency in PWM mode is adjustable, ranging from 200 kHz to 2.2 MHz by an external resistor. The TPS61088 also implements a programmable soft-start function and an adjustable switching peak current limit function. In addition, the device provides 13.2-V output overvoltage protection, cycle-by-cycle overcurrent protection, and thermal shutdown protection.

The TPS61088 is available in a 4.50-mm × 3.50-mm 20-pin VQFN package.


  • Previous:
  • Next:

  • • 2.7-V to 12-V input voltage range

    • 4.5-V to 12.6-V output voltage range

    • 10-A switch current

    • Up to 91% efficiency at VIN = 3.3 V, VOUT = 9 V, and IOUT = 3 A

    • Mode selection between PFM mode and forced PWM mode at light load

    • 1.0-µA current into the VIN pin during shutdown

    • Resistor-programmable switch peak current limit

    • Adjustable switching frequency: 200 kHz to 2.2 MHz

    • Programmable soft start

    • Output overvoltage protection at 13.2 V

    • Cycle-by-cycle overcurrent protection

    • Thermal shutdown

    • 4.50-mm × 3.50-mm 20-pin VQFN package

    • Create a custom design using the TPS61088 with the WEBENCH Power Designer

    • Portable POS terminal

    • Bluetooth™ speaker

    • E-cigarette

    • Thunderbolt interface

    • Quick charge power bank

    Related Products