TPS62140RGTR Switching Voltage Regulators 3-17V 2A

Short Description:

Manufacturers: Texas Instruments
Product Category: PMIC – Voltage Regulators – DC DC Switching Regulators
Data Sheet: TPS62140RGTR
Description: IC REG BUCK ADJUSTABLE 2A 16QFN
RoHS status: RoHS Compliant


Product Detail

Features

Applications

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: Texas Instruments
Product Category: Switching Voltage Regulators
RoHS:  Details
Mounting Style: SMD/SMT
Package / Case: VQFN-16
Topology: Buck
Output Voltage: 900 mV to 6 V
Output Current: 2 A
Number of Outputs: 1 Output
Input Voltage, Min: 3 V
Input Voltage, Max: 17 V
Quiescent Current: 17 uA
Switching Frequency: 2.5 MHz
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 125 C
Series: TPS62140
Packaging: Reel
Packaging: Cut Tape
Packaging: MouseReel
Brand: Texas Instruments
Development Kit: TPS62140EVM-505
Input Voltage: 3 V to 17 V
Moisture Sensitive: Yes
Operating Supply Current: 17 uA
Product: Voltage Regulators
Product Type: Switching Voltage Regulators
Factory Pack Quantity: 3000
Subcategory: PMIC - Power Management ICs
Type: Voltage Converter
Unit Weight: 0.005291 oz

♠ TPS6214x 3-V to 17-V 2-A Step-Down Converter in 3 × 3 QFN Package

The TPS6214x family is an easy-to-use synchronous step-down DC-DC converter optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response by use of the DCS-Control topology.

With their wide operating input voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either a Li-Ion or other batteries, as well as from 12-V intermediate power rails. It supports up to 2 A of continuous output current at output voltages between 0.9 V and 6 V (with 100% duty-cycle mode). The output voltage start-up ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the Enable (EN) and open-drain Power Good (PG) pins.

In power save mode, the devices draw quiescent current of about 17 μA from VIN. Power Save Mode, entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In Shutdown Mode, the device is turned off and current consumption is less than 2 μA.

The device, available in adjustable and fixed output voltage versions, is packaged in a 16-pin VQFN package measuring 3 mm × 3 mm (RGT).


  • Previous:
  • Next:

  • • Versatile Synchronous Buck DC/DC Converter
    – Operating Input Voltage Range of 9 V to 75 V
    – Integrated 80-V, 0.7-A N-Channel Buck Switch
    – Internal High-Voltage VCC Regulator
    – Adjustable Output Voltage
    – High Efficiency Operation

    • Adaptive Constant On-Time Control Architecture
    – Ultra-Fast Transient Response
    – No Control Loop Compensation Required

    • Nearly Constant Switching Frequency
    – PWM On-Time Varies Inversely with Input Voltage

    • Precision 2.5-V Reference

    • Low Input Quiescent Current

    • Inherent Protection Features for Robust Design
    – Intelligent Current Limit Protection
    – VCC and Gate Drive UVLO Protection
    – Thermal Shutdown Protection With Hysteresis
    – External Shutdown Control

    • 8-Pin VSSOP and WSON Packages

    • Create a Custom Regulator Design Using WEBENCH® Power Designer

    • Non-Isolated DC/DC Buck Regulator

    • Secondary High-Voltage Post Regulator

    • 48-V Automotive Systems

    Related Products