TPS7A6133QKVURQ1 AC 300mA 40V LDO Reg
♠ Product Description
Product Attribute | Attribute Value |
Manufacturer: | Texas Instruments |
Product Category: | LDO Voltage Regulators |
Mounting Style: | SMD/SMT |
Package / Case: | TO-252-5 |
Output Voltage: | 3.3 V |
Output Current: | 300 mA |
Number of Outputs: | 1 Output |
Polarity: | Positive |
Quiescent Current: | 25 uA |
Input Voltage, Min: | 4 V |
Input Voltage, Max: | 40 V |
PSRR / Ripple Rejection - Typ: | 60 dB |
Output Type: | Fixed |
Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 125 C |
Dropout Voltage: | 300 mV |
Qualification: | AEC-Q100 |
Series: | TPS7A6133-Q1 |
Packaging: | Reel |
Packaging: | Cut Tape |
Packaging: | MouseReel |
Brand: | Texas Instruments |
Dropout Voltage - Max: | 500 mV |
Line Regulation: | 20 mV |
Load Regulation: | 35 mV |
Moisture Sensitive: | Yes |
Operating Supply Current: | 20 uA |
Operating Temperature Range: | - 4 |
Pd - Power Dissipation: | 4.27 W |
Product: | LDO Voltage Regulators |
Product Type: | LDO Voltage Regulators |
Factory Pack Quantity: | 2500 |
Subcategory: | PMIC - Power Management ICs |
Type: | Low Dropout Voltage Regulator |
Unit Weight: | 0.011640 oz |
♠ TPS7A6x-Q1 300-mA, 40-V Low-Dropout Regulator With 25-µA Quiescent Current
The TPS7A60-Q1 and TPS7A61-Q1 comprise a family of low-dropout linear voltage regulators designed for low power consumption and quiescent current less than 25 µA in light-load applications.
These devices feature integrated overcurrent protection and are designed to achieve stable operation even with low-ESR ceramic capacitors.
Power-on-reset delay is implemented during device start-up to indicate that the output voltage is stable and in regulation. The power-on-reset delay is fixed (250 µs typical), and can also be programmed by an external capacitor. A low-voltage tracking feature allows for a smaller input capacitor and can possibly eliminate the need of using a boost converter during cold-crank conditions. Because of these features, these devices are well-suited in power supplies for various automotive applications
• AEC-Q100 qualified for automotive applications:
– Temperature grade 1: –40°C to 125°C, TA
– Junction Temperature: –40°C to 150°C, TJ
• Low dropout voltage:
– 300 mV at IOUT = 150 mA
• 7-V to 40-V wide input voltage range with up to 45-V transients
• 300-mA maximum output current
• Ultralow quiescent current:
– IQUIESCENT = 25 µA (typical) at light loads
– ISLEEP < 2 µA when ENABLE = low
• 3.3-V and 5-V fixed output voltage
• Low-ESR ceramic output stability capacitor
• Integrated power-on reset:
– Programmable delay
– Open-drain reset output
• Integrated fault protection:
– Short-circuit and overcurrent protection
– Thermal shutdown
• Low-input-voltage tracking
• Thermally enhanced power packages:
– 5-pin TO-263 (KTT, D2PAK)
– 5-pin TO-252 (KVU, DPAK)
• Automotive head units
• Automotive center information displays
• Hybrid instrument clusters