TPS7B7701QPWPRQ1 LDO Voltage Regulators Automotive 300-mA, off-battery (40-V), adjustable antenna low-dropout voltage regulator 16-HTSSOP -40 to 125
♠ Product Description
Product Attribute | Attribute Value |
Manufacturer: | Texas Instruments |
Product Category: | LDO Voltage Regulators |
RoHS: | Details |
Mounting Style: | SMD/SMT |
Package/Case: | HTSSOP-16 |
Output Current: | 300 mA |
Number of Outputs: | 1 Output |
Input Voltage, Min: | 4.5 V |
Input Voltage, Max: | 40 V |
PSRR / Ripple Rejection - Typ: | 73 dB |
Output Type: | Adjustable |
Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 125 C |
Dropout Voltage: | 350 mV |
Qualification: | AEC-Q100 |
Series: | TPS7B7701-Q1 |
Packaging: | Reel |
Packaging: | Cut Tape |
Packaging: | MouseReel |
Brand: | Texas Instruments |
Line Regulation: | 10 mV |
Load Regulation: | 20 mV |
Moisture Sensitive: | Yes |
Operating Supply Current: | 600 uA |
Operating Temperature Range: | - 4 |
Product: | LDO Voltage Regulators |
Product Type: | LDO Voltage Regulators |
Factory Pack Quantity: | 2000 |
Subcategory: | PMIC - Power Management ICs |
Type: | Single and Dual Channel Antenna LDO Regulators |
Unit Weight: | 181.100 mg |
♠ TPS7B770x-Q1, Automotive, Single- and Dual-Channel Antenna LDO With Current Sense
The TPS7B770x-Q1 family of devices feature a single and dual, high-voltage low-dropout regulator (LDO) with current sensing, designed to operate with a wide input-voltage range from 4.5 V to 40 V (45-V load dump protection).
These devices provide power to the low-noise amplifiers of the active antenna through a coax cable with 300 mA per channel current. Each channel also provides an adjustable output voltage from 1.5 V to 20 V. These devices provide diagnostics through the current sense and error pins. To monitor the load current, a high-side current-sense circuitry provides a proportional analog output to the sensed load current. The accurate current sense allows detection of open, normal, and short-circuit conditions without the need for further calibration. Current sense can be multiplexed between channels and devices to save analog-to-digital converter (ADC) resources. Each channel also implements adjustable current limit with an external resistor.
An integrated reverse polarity diode eliminates the need for an external diode. These devices feature standard thermal shutdown, short-to-battery protection on the output, and reverse current protection. Each channel has internal inductive clamp protection on the output during inductive switch off.
These devices operate over a –40°C to +125°C ambient temperature range.
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
– Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
– Device HBM ESD Classification 2
– Device CDM ESD Classification C4B
• Single and Dual-Channel LDO With Current Sense and Adjustable Current-Limit
• 4.5-V to 40-V Wide Input Voltage Range, 45-V Load Dump
• Power Switch Mode When Tying FB to GND
• 1.5-V to 20-V Adjustable Output Voltage
• Up to 300-mA Output Current per Channel
• Adjustable Current-Limit With External Resistor
• High Accuracy Current-Sense to Detect Antenna Open Condition at Low Current Without Further Calibration
• High Power-Supply Rejection Ratio: Typical 73 dB at 100 Hz
• Integrated Reverse-Polarity Protection, Down to
–40 V and No Need for External Diode
• 500-mV Max Dropout Voltage at 100-mA Load
• Stable With Output Capacitor in 2.2-µF to 100-µF Range (ESR 1 mΩ to 5 Ω)
• Integrated Protection and Diagnostics
– Thermal Shutdown
– Undervoltage Lockout (UVLO)
– Short-Circuit Protection
– Reverse Battery Polarity Protection
– Reverse-Current Protection
– Output Short-to-Battery Protection
– Output Inductive Load Clamp
– Multiplexing Current Sense Between Channels and Devices
– Ability to Distinguish All Faults With Current Sense
• 16-Pin HTSSOP PowerPAD™ Package
• Infotainment Active-Antenna Power Supplies
• Surround-View Camera Power Supplies
• High-Side Power Switch For Small-Current Applications