TPS7B8250QDGNRQ1 LDO Voltage Regulators Automotive 300-mA, off-battery (40-V), ultra-low-IQ, low-dropout voltage regulator with enable 8-HVSSOP -40 to 150
♠ Product Description
Product Attribute | Attribute Value |
Manufacturer: | Texas Instruments |
Product Category: | LDO Voltage Regulators |
RoHS: | Details |
Mounting Style: | SMD/SMT |
Package/Case: | MSOP-PowerPad-8 |
Output Voltage: | 2.5 V |
Output Current: | 300 mA |
Number of Outputs: | 1 Output |
Polarity: | Positive |
Quiescent Current: | 2.7 uA |
Input Voltage, Min: | 3 V |
Input Voltage, Max: | 40 V |
PSRR / Ripple Rejection - Typ: | 60 dB |
Output Type: | Fixed |
Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 150 C |
Dropout Voltage: | 400 mV |
Qualification: | AEC-Q100 |
Series: | TPS7B82-Q1 |
Packaging: | Reel |
Packaging: | Cut Tape |
Packaging: | MouseReel |
Brand: | Texas Instruments |
Dropout Voltage - Max: | 700 mV |
Line Regulation: | 10 mV |
Load Regulation: | 20 mV |
Moisture Sensitive: | Yes |
Output Voltage Range: | - |
Product: | LDO Voltage Regulators |
Product Type: | LDO Voltage Regulators |
Factory Pack Quantity: | 2500 |
Subcategory: | PMIC - Power Management ICs |
Type: | Automotive |
Voltage Regulation Accuracy: | 2 % |
Unit Weight: | 26 mg |
♠ TPS7B82-Q1 Automotive 300-mA, High-Voltage, Ultra-Low-IQ Low-Dropout Regulator
In automotive battery-connected applications, low quiescent current (IQ) is important to save power and extend battery lifetime. Ultra-low IQ must be included for always-on systems.
The TPS7B82-Q1 is a low-dropout linear regulator designed to operate with a wide input-voltage range from 3 V to 40 V (45-V load dump protection). Operation down to 3 V allows the TPS7B82-Q1 to continue operating during cold-crank and start and stop conditions. With only 2.7-µA typical quiescent current at light load, this device is an optimal solution for powering microcontrollers (MCUs) and CAN/LIN transceivers in standby systems. The device features integrated short-circuit and overcurrent protection.
This device operates in ambient temperatures from –40°C to +125°C and with junction temperatures from –40°C to +150°C. Additionally, this device uses a thermally conductive package to enable sustained operation despite significant dissipation across the device. Because of these features, the device is designed as a power supply for various automotive applications.
• AEC-Q100 qualified for automotive applications:
– Temperature grade 1: –40°C ≤ TA ≤ 125°C
– Temperature grade 0: –40°C ≤ TA ≤ 150°C
• Extended junction temperature range:
– Grade 1: –40°C ≤ TJ ≤ 150°C – Grade 0: –40°C ≤ TJ ≤ 165°C
• Low quiescent current IQ:
– 300-nA shutdown IQ
– 2.7 µA typical at light loads
– 5 µA maximum at light loads
• 3-V to 40-V wide VIN input voltage range with up to 45-V transient
• Maximum output current: 300 mA
• 2% output-voltage accuracy
• Maximum dropout voltage: 700 mV at 200-mA load current for fixed 5-V output version
• Stable with low-ESR (0.001-Ω to 5-Ω) ceramic output-stability capacitor (1 µF to 200 µF)
• Fixed 2.5-V, 3.3-V, and 5-V output voltage
• Packages:
– 8-pin HVSSOP, RθJA = 63.9°C/W
– 6-pin WSON, RθJA = 72.8°C/W
– 5-pin TO-252, RθJA = 31.1°C/W
– 14-pin HTSSOP, RθJA = 52.0°C/W
• Automotive head units
• Telematics control units
• Headlights
• Body control modules
• Inverter and motor controls