TPS92692PWPR LED Lighting Drivers LED controller with spread spectrum frequency modulation and internal PWM Generator 20-HTSSOP
♠ Product Description
| Product Attribute | Attribute Value |
| Manufacturer: | Texas Instruments |
| Product Category: | LED Lighting Drivers |
| RoHS: | Details |
| Series: | TPS92692 |
| Mounting Style: | SMD/SMT |
| Package / Case: | HTSSOP-20 |
| Number of Outputs: | 1 Output |
| Output Current: | 5 A |
| Input Voltage, Min: | 4.5 V |
| Input Voltage, Max: | 65 V |
| Topology: | Boost, Buck, Flyback, SEPIC |
| Operating Frequency: | 800 kHz |
| Output Voltage: | Adjustable |
| Minimum Operating Temperature: | - 40 C |
| Maximum Operating Temperature: | + 125 C |
| Packaging: | Reel |
| Packaging: | Cut Tape |
| Packaging: | MouseReel |
| Features: | Adjustable Switch Frequency, High Output Accuracy, Precision Dimming Control, Soft Start |
| Brand: | Texas Instruments |
| Dimming: | Analog, PWM |
| Input Voltage: | 4.5 V to 65 V |
| Moisture Sensitive: | Yes |
| Number of Channels: | 1 Channel |
| Operating Temperature Range: | - 40 C to + 125 C |
| Product: | LED Drivers |
| Product Type: | LED Lighting Drivers |
| Factory Pack Quantity: | 2000 |
| Subcategory: | Driver ICs |
| Supply Current - Max: | 6.6 mA |
| Type: | LED Controller |
| Width: | 4.5 mm |
| Unit Weight: | 0.004522 oz |
♠ TPS92692, TPS92692-Q1 High Accuracy LED Controller With Spread Spectrum Frequency Modulation
The TPS92692 and TPS92692-Q1 are high accuracy peak current mode based controllers designed to support step-up/down LED driver topologies. The device incorporates a rail-to-rail current amplifier to measure LED current and spread spectrum frequency modulation technique for improved EMI performance.
This high performance LED controller can independently modulate LED current using either analog or PWM dimming techniques. Linear analog dimming response with over 15:1 range is obtained by varying the voltage across the high impedance analog adjust (IADJ) input. PWM dimming of LED current is achieved by directly modulating the DIM/PWM input pin with the desired duty cycle or by enabling the internal PWM generator circuit. The PWM generator translates the DC voltage at DIM/PWM pin to corresponding duty cycle by comparing it to the internal triangle wave generator. The optional PDRV gate driver output can be used to drive an external P-Channel series MOSFET.
The TPS92692 and TPS92692-Q1 devices support continuous LED status check through the current monitor (IMON) output. The devices also include an open drain fault indicator output to indicate LED overcurrent, output overvoltage and output undervoltage conditions.
• Wide Input Voltage: 4.5 V to 65 V
• Better than ± 4% LED Current Accuracy over –40°C to 150°C Junction Temperature Range
• Spread Spectrum Frequency Modulation for Improved EMI
• Comprehensive Fault Protection Circuitry with Current Monitor output and Open Drain Fault Flag Indicator
• Internal Analog Voltage to PWM Duty Cycle Generator for stand-alone Dimming Operation
• Compatible with Direct PWM Input with over 1000:1 Dimming Range
• Analog LED Current Adjust Input (IADJ) with over 15:1 Contrast Ratio
• Integrated P-Channel Driver to enable Series FET Dimming and LED Protection
• TPS92692-Q1: Automotive Q100 Grade 1 Qualified
• TPS92692-Q1: Automotive Exterior Lighting Applications
• Driver Monitoring Systems (DMS)
• LED General Lighting Applications
• Exit Signs and Emergency Lighting
