TS3USB3000RSER USB Switch ICs DPDT USB 2.0 Hi-Spd (480Mbps)
♠ Product Description
Product Attribute | Attribute Value |
Manufacturer: | Texas Instruments |
Product Category: | USB Switch ICs |
Product: | USB 2.0 Multiplexers |
Configuration: | 2 x 2:1 |
On Resistance - Max: | 9 Ohms |
On Time - Max: | 400 ns |
Off Time - Max: | 400 ns |
Operating Supply Voltage: | 3.3 V |
Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 85 C |
Mounting Style: | SMD/SMT |
Package / Case: | UQFN-10 |
Packaging: | Reel |
Packaging: | Cut Tape |
Packaging: | MouseReel |
Bandwidth: | 6.1 GHz |
Brand: | Texas Instruments |
Number of Switches: | 2 Switch |
Operating Supply Current: | 50 uA |
Product Type: | USB Switch ICs |
Series: | TS3USB3000 |
Factory Pack Quantity: | 3000 |
Subcategory: | Switch ICs |
Supply Voltage - Max: | 4.3 V |
Supply Voltage - Min: | 2.7 V |
Switch Continuous Current: | 100 mA |
Unit Weight: | 0.000247 oz |
♠ TS3USB3000 DPDT USB 2.0 High-Speed and Mobile High-Definition Link (MHL) 6.1-GHz Switch
The TS3USB3000 device is a double-pole, double throw (DPDT) multiplexer that includes a high-speed Mobile High-Definition Link (MHL) switch and an USB 2.0 High-Speed (480 Mbps) switch in the same package. These configurations allow the system designer to use a common USB or Micro-USB connector for both MHL video signals and USB data.
The TS3USB3000 has a VCC range of 2.3 V to 4.8 V and supports overvoltage tolerance (OVT) feature, which allows the I/O pins to withstand overvoltage conditions (up to 5.5 V). The power-off protection feature forces all I/O pins to be in high-impedance mode when power is not present, allowing full isolation of the signal lines under such condition without excessive leakage current. The select pins of TS3USB3000 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from a mobile processor.
The TS3USB3000 comes with a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it a perfect candidate to be used in mobile applications.
• VCC Range 2.3 V to 4.8 V
• Mobile Hi-Definition Link (MHL) Switch:
– Bandwidth (–3 dB): 6.1 GHz
– RON (Typical): 5.7 Ω
– CON (Typical): 1.6 pF
• USB Switch:
– Bandwidth (–3 dB): 6.1 GHz
– RON (Typical): 4.6 Ω
– CON (Typical): 1.4 pF
• Current Consumption: 30 µA (Typical)
• Special Features:
– IOFF Protection Prevents Current Leakage in Powered-Down State (VCC and VBUS = 0 V)
– 1.8-V Compatible Control Inputs (SEL, OE)
– Overvoltage Tolerance (OVT) on all I/O Pins up to 5.5 V Without External Components
– Overvoltage Protection When 9-V Short to D+/-Pin
• ESD Performance:
– 3.5-kV Human Body Model (A114B, Class II)
– 1-kV Charged-Device Model (C101)
• 10-Pin UQFN Package (1.5-mm × 2-mm, 0.5-mm Pitch)
• Smartphones, Tablets, Mobile
• Portable Instrumentation
• Digital Still Cameras