XTR305IRGWR Sensor Interface Industrial analog current to voltage output driver 20-VQFN -55 to 125

Short Description:

Manufacturers: Texas Instruments 
Product Category:Sensor Interface 
Data Sheet: XTR305IRGWR
Description:INTERFACE IC MISC
RoHS status: RoHS Compliant


Product Detail

Features

Applications

Product Tags

♠ Product Description

Product Attribute Attribute Value
Manufacturer: Texas Instruments
Product Category: Sensor Interface
RoHS:  Details
Type: Analog Current/Voltage Output Driver
Supply Voltage - Max: 22 V
Supply Voltage - Min: 5 V
Operating Supply Current: 1.8 mA
Minimum Operating Temperature: - 55 C
Maximum Operating Temperature: + 125 C
Mounting Style: SMD/SMT
Package/Case: VQFN-20
Packaging: Reel
Packaging: Cut Tape
Packaging: MouseReel
Brand: Texas Instruments
Ib - Input Bias Current: 20 nA
Moisture Sensitive: Yes
Number of Channels: 1 Channel
Output Current: 20 mA
Output Voltage: 10 V
Product: Signal Conditioners
Product Type: Sensor Interface
Reference Voltage: 4 V
Series: XTR305
Factory Pack Quantity: 2000
Subcategory: Interface ICs
Unit Weight: 64.500 mg

♠ XTR305 Industrial Analog Current or Voltage Output Driver

The XTR305 is a complete output driver for cost-sensitive industrial and process control applications. The output can be configured as current or voltage by the digital I/V select pin. No external shunt resistor is required. Only external gain-setting resistors and a loop compensation capacitor are required.

The separate driver and receiver channels provide flexibility. The instrumentation amplifier (IA) can be used for remote voltage sense or as a high-voltage, high-impedance measurement channel. In voltage-output mode, a copy of the output current is provided, allowing calculation of load resistance.

The digital output-selection capability, together with the error flags and monitor pins, makes remote configuration and troubleshooting possible. Fault conditions on the output and on the IA input, as well as overtemperature conditions, are indicated by the error flags. The monitoring pins provide continuous feedback about load power or impedance. For additional protection, the maximum output current is limited, and thermal protection is provided.

The XTR305 is specified over the −40°C to +85°C industrial temperature range and for supply voltages up to 40 V, and is operational over the extended industrial temperature range (−55°C to +125°C).


  • Previous:
  • Next:

  • • User-Selectable: Current or Voltage Output

    • VOUT: ±10 V (up to ±17.5 V at ±20-V supply)

    • IOUT: ±20 mA (Linear up to ±24 mA)

    • 40-V Supply Voltage

    • Diagnostic Features:

      – Short- or Open-Circuit Fault Indicator Pin

      – Thermal Protection

      – Overcurrent Protection

    • No Current Shunt Required

    • Output Disable for Single Input Mode

    • Separate Driver and Receiver Channels

    • Designed For Testability

    • Motor Drives Analog Outputs: 4-20 mA and ±10 V

    • PLC Output Programmable Driver

    • Industrial Cross-Connectors

    • Industrial High-Voltage I/O

    • Three-Wire Sensor Current or Voltage Output

    • ±10-V Two- and Four-Wire Voltage Output U.S. Patent Nos. 7,427,898, 7,425,848, and 7,449,873

    Related Products